Integrated piezo ignition, no need for a lighter!
Robust, simple, and very user-friendly screw-on stove. It will be well protected in your backpack with its transport box. A super-affordable price
Our backpacking designers designed this simple and user-friendly stove for preparing your meals during treks and hikes.
Safety
This stove meets standard EN521.
This stove is for exclusive use with the 3.5 oz, 8.1 oz, and 15.9 oz Decathlon – Forclaz butane/propane cartridges.
The Decathlon cartridges comply with the EN417 standard and are compatible with the Trek 100, Trek 500 Light, and Trek 500 Remote Decathlon – Forclaz stoves.
Read the instructions and precautions for use attached to the stove.
Setting up the stove and connecting a gas cartridge:
To set up a gas cartridge, always do so in a ventilated place, preferably outdoors and never near a flame, heat source, spark, individuals, or flammable materials.
Check that your stove’s gas inlet is properly closed and check the location and condition of the leak-proof seal.
Make sure that the cartridge is on a stable flat surface. Do not shake.
Setting up the stove and connecting a gas cartridge (continued):
Hold the device and screw in the cartridge by hand by turning it clockwise until it stops, being careful not to damage the screw thread.
Follow the same instructions to take off the cartridge.
It can be dangerous to use cartridges other than Decathlon – Forclaz.
It’s normal to hear a small fizzing sound (escaping gas) for less than 2 seconds when connecting the cartridge to the stove.
Weight and dimensions
Stove weight: 6.5 oz
Box weight: 3.7 oz
Stove dimensions: Ø 4.7″ x h 3.3″
Box dimensions: L 4″ x 4″ x 3.5″
Weights, volumes, and dimensions may vary slightly due to production tolerances.
Ease of use
Pan holder on 4 feet, perfectly compatible with all cooking pots
Installation:
Place the stove on the cartridge to align the threads. Screw. Assemble the stove on a flat, unobstructed surface. Open the flow control valve and operate the piezo (several times if necessary). Your stove is lit.
We recommend you light your stove with a pan in place above the burner.
Make sure the assembly is stable.
Heating time
Our internal tests give us values that reflect the actual conditions of use. In fact, we tested our stoves with Trek 500 stainless steel pans, filled with a liter of water.
Actual power result: Boiling time for 1 L of water: 3 min 48 sec. Actual power: 2200 watts. Actual consumption: 5.6 oz/hour. .
The results and performance levels of different stoves must be analyzed in a comparable way (same conditions and parameters).
Heating time (continued)
The heating time of a stove is subject to a mandatory standardized process for EU certification but does not necessarily reflect the actual conditions of use.
Standard EN521 parameters (heating rate):
Propane gas at 3 bar pressure, without container.
Rated power result: 4.1 kW / 10.2 oz/h
Performance and consumption
Many parameters affect the capacity and performance of your stove: atmospheric pressure, wind, damp, etc. These can change the boiling temperature and the heating time as well as the number of liters heated with one cartridge.
We strongly recommend using a windshield to optimize gas consumption.
The performance of a stove is therefore assessed according to the gas consumed / heating speed.
Eco-design
Given the concern of our teams for the environment, this product has benefited from an eco-design approach that can be broken down into the following:
– reduction in the number of parts making up the product
– selection of robust materials
– repairability (piezo available as a spare part, etc.)
– transport box in recycled polypropylene
Eco-design (continued)
– elimination of surface treatments that would only have an aesthetic function. As such, we have removed the paints and anodizing on all the parts (feet and pan support, burner, gas flow control, etc.) of this stove, while still ensuring its performance, technical features, and durability. These actions help to reduce the environmental impact of your product.
Compatibility
Warning: This stove is not compatible with Coleman cartridges. Indeed, our design choices do not enable us to guarantee compatibility between the Coleman valve and the connector on our stove. There is no safety risk but the cartridge valve will not be open.
Composition
Body : 100.0% Stainless steel
Accessories : 100.0% Steel
Power : Boiling time for 1 liter of water: 3 min 48 sec.
Battery life : 5.6 oz/h or 1 h 10 m with a 8.1 oz Decathlon screw-on cartridge.
Compatibility : Screw-in cartridges (eg:Decathlon 100, 230, & 450g)Standard EN417.Butane/propane
Easy to use : Built-in piezo.
Weight 6.5 oz
Transport box included (+3.7 oz).































Reviews
There are no reviews yet.