Best reviews of ⭐ Forclaz Trek 500, 1 L 🎒 Backpacking Water Bladder ✔️

Flexible water bladder, practical and cheap, to enable you to drink without constraint (1 L).

Our mountain backpacking team has designed this water bladder for backpackers and hikers who want to drink freely during their trek.

Directions for use

Use water whose temperature is between 68°F and 104°F. Do not use: alcohol, fats (dairy products, oils, etc).
In temperatures below 32°F, blow into the hose after use to remove the water in it and reduce the risk of icing in the hose and mouthpiece.
If the sound of water sloshing in your bag disturbs you, empty the air in your water bladder by turning it upside down and guiding the air bubbles out while sucking in the air.

Functions

Removable strip over wide opening enabling easy filling and cleaning.
This strip has eyelets to hang the water bladder in bags with hooks.
Mouthpiece with stop/start position (by turning the gray part of the mouthpiece) to avoid water spillage when hiking. To drink, place the mouthpiece in “ON ” position then suck while biting down on the mouthpiece.

Care instructions

Clean the bladder and mouthpiece after each use with normal washing-up liquid. You can use the B-TWIN bottle washing kit + drying hanger (code: 631585) particularly if you used a sweet drink. Do not leave the drink in the water bladder more than 24 h. Not dishwasher or microwave safe.

1st use

Rinse the entire product 3 times with clean water before 1st use.

Materials and regulations

Our products and materials comply with applicable food contact standards. They contain no Bisphenol A (BPA) in line with the French regulations in force.

Weight and dimensions

Volume: 1 liter
Size: 6.7″ x 12.2″, hose 39.4″
Weight: 3.3 oz
Available in: 1 L/2 L/3 L

Composition

Skin : 70.0% Ethylene Vinyl Acetate, Skin : 30.0% Polyethylene Low Density
Air chamber : 100.0% Thermoplastic polyurethane
Handle : 100.0% Acrylonitrile butadiene styrene
Sliding bar : 70.0% Ethylene Vinyl Acetate, Sliding bar : 30.0% Polyethylene Low Density
Skin/Tube Connector : 100.0% Ethylene Vinyl Acetate
Tube/Valve Connector : 100.0% Polyethylene Low Density
On/Off System : 100.0% Polypropylene
Bite valve : 100.0% Silicone

Easy to use : Mouthpiece with stop/start position, wide opening for easy filling.

Easy to maintain : Sliding strip to open the bladder completely and clean easily.

Capacity : 1 liter, suitable for short hikes or as an extra during treks.