Hot Sale 😀 Hiking Clothing Quechua, Pressure Solar Camping Shower, 10 L 🎉

Our motivation? We want to provide you with a solar shower solution that you do not have to hang up! The pumping system ensures the water will be pressurized even if your shower is on the ground!

Our team of campers created this 10 liter pressure-balanced solar shower so you can have a comfortable shower outside and wash your belongings.

SIZE

Shower filled under pressure: 21.7″ x 8.7″ diameter

TIME AND CONDITIONS FOR HEATING WATER

Heating time depends on several factors: initial water temperature, outdoor temperature, ground type (concrete, grass, etc.), wind, sun, etc. To speed up heating time, increase the area exposed to the sun by laying the deflated shower flat. It’s also possible to add hot water directly, but be careful—the temperature shouldn’t go over 110°F, as you risk damaging the product components and putting yourself in danger.

Recommendations for use

To encourage increased temperature, put the shower in the sun between 12:00 and 18:00. We advise against putting it behind a car windscreen; Our tests show that the water could go beyond 154°F. Be aware that the temperature drops as soon as the sun fades. When you put the pressure on, a ringing noise from the valve will signal maximum pressure: pump again when the pressure drops in use. Be sure to push the pipe well into the connector.

DESIGN TEAM TESTS – STANDING SHOWER

Here are our temperature readings after a heating test on the standing shower exposed to the sun. The test took place one mid-June afternoon in the south of France.
The shower was standing, pressurized, and filled w/ water to its maximum level(10L).
Outside temperature of 55°F, barely any wind, 750 W/m² solar power. Initial water temperature: 49°F. In 3 hours, the water went from 72°F to 86°F.
In 5 hours, the water went from 72°F to 95°F.
In 6 hours 48 minutes, the water went from 72°F to 100°F.

DESIGN TEAM TESTS – SHOWER LAY FLAT

You can improve heating time by increasing the area exposed to the sun: Lay the shower horizontally on a table or on the ground. Performance will be improved under the same test conditions in standing position.

WATER TEMPERATURE GAUGE

We have added a water temperature gauge. This start when the water is at 86°F and goes up to 104°F. In all cases, it is recommended to let the water run a little before taking your shower to ensure that the water is not too hot.

WATER VISIBILITY

We have added a window so you can see the current water level.

REPAIRS

This shower is sold with a repair kit for the pump (seals). If needed, you can find the shower head and pump repair kit on our website in after-sales service. To watch our tutorial videos, go to our after-sales service website.
For the handle, copy the code in parentheses (960264) and paste it into our search bar.
For the repair kit, copy the code in parentheses (960271) and paste it into our search bar.

Composition

Main fabric : 70.0% Polyester cationic, Main fabric : 30.0% Thermoplastic polyurethane
Body : 100.0% Polypropylene
Carry bag : 90.0% Polyester cationic, Carry bag : 10.0% Thermoplastic polyurethane
Webbing : 100.0% Polyester cationic
Accessories : 100.0% Acrylonitrile butadiene styrene

Easy to use : No need to hang the shower: The water is pressurized with a pump

Capacity : 10 liter capacity | On/off button on the handle to prevent waste

Easy to open/close : Wide opening to make it easy to fill and dry quickly

Easy to transport : Carrying strap | Storage bag

Compact design : Compact and easy to fold up: 8.7″ x 15.4″ x 4.7″

Weight : Lightweight: 1.9 lbs including the bag