Our motivation? To offer a tent with an all-in-1 inflatable structure and pre-assembled bedrooms. The perfect combination for those who do not want to waste time pitching their tent.
Living room
Living room of 70 sq ft with a maximum headroom of 74.8″.
This tent has several pieces of equipment:
– a bathtub groundsheet that can be raised at the entrances in case of rain
– a transparent window with blackout cover
– a mosquito net window with blackout cover
– storage pockets in the bedrooms and in the living room
Pitching / Striking
Inflatable all-in-1 structure with pre-assembled bedroom and fly sheet.
Using our Quechua red 5.2 liter pump with built-in pressure gauge, we advise you to inflate the tubes to 7 PSI pressure.
To see this pump, copy the reference 8243066 and paste it into the search engine of our website.
Sun protection
The fabric of the flysheet offers UPF 30 sun protection.
Warning: a significant amount of UV light can get in through a simple open door.
Ventilation
The ventilated flysheet on the living room allows air to flow and reduces condensation inside the tent. Upper air vents are also located at the front and rear of the tent, as well as mosquito nets at the top of the door and base of the bedroom.
Wind-resistance
We test all our tents in a wind tunnel on a turntable. The goal is to expose each side of our tent to the same wind intensity.
Well pitched with the guy ropes properly deployed, this tent remains habitable with a wind of force 7, measured at 35 mph.
Waterproofing
We test our tents to validate their waterproofing. The 1st test is done in the laboratory, 4 hours under 200 liters of water per hour per sqm, the equivalent of tropical rain of 200 mm per hour. The 2nd test is done in the field under real conditions by our teams. This tent is equipped with a polyurethane-coated polyester flysheet of 2000 mm water resistance. It also has seams taped using heat-sealed strips and a 6.7 oz/sqm polyethylene groundsheet.
Size and weight
Rectangular cover | 29.5″ x 11.8″ x 12.6″ | 72 liters | 27.6 lbs
Warranty
As designers and users who love nature, we care about the durability of our products. That’s why all our tents are designed to be repairable. Spare parts and repairs of inflatable poles are available at the workshop of your Decathlon store or on our website at the following address: http://bit.ly/sav-tentes. If you have a problem with this tent, consult the after-sales information: http://bit.ly/tente-gonflable-4p-1ch
Poles, pegs
Inflatable poles – All our inflatable poles have a 2-layer arch structure: a thermoplastic polyurethane (TPU) air chamber and a 600 denier polyester cover*.
Living room reinforcement – There’s an aluminum bar in the living room to stiffen the structure.
Tent pegs – All our pegs are made of steel and have a diameter of 6 mm.
*600 denier indicates a weight of 600 g (1.3 lbs) for 9 meters (29.5′).
Sleeping width
The bedroom of this tent is designed to accommodate a maximum of 4 mattresses 27.6″ wide. It can also accommodate a couple looking for a very large bedroom.
Composition
Flysheet : 100.0% Polyester cationic Inner fabric : 100.0% Polyester cationic Pole : 55.0% Thermoplastic polyurethane, Pole : 40.0% Polyester cationic, Pole : 5.0% Aluminum Tent Footprint : 100.0% Polyethylene Low Density Carry bag : 100.0% Polyester cationic
Capacity : Bedroom: 110.2″ x 82.7″ | Stand-up living room: 70 sq ft with bowl ground sheet
Easy assembly/dismantling : Very quick to pitch: all-in-1 inflatable structure and pre-assembled rooms.
Heat resistant : Living room with a ventilated flysheet | 1 large mosquito net window
Blackout : UPF 30 fabric: allows daylight to enter and filters part of the UV light.
Waterproof : Tropical rain laboratory test | Under shower: 200 mm of water per hour per sqm
Durability : Withstands force 7 winds – around 35 mph | Wind tunnel test





































































Reviews
There are no reviews yet.