1st jacket in the range with side ventilation, this waterproof, breathable and ventilated hiking jacket has the essential functions of a major hiking functions… at a low price!
mountain hikers who need a jacket that provides protection from the rain or wind while also allowing air to circulate inside.
Sizing information and cut
Standard cut. The jacket’s inner volume allows you to wear it over a second technical layer such as a light down or fleece garment.
Hood
Height can be adjusted using an elastic drawstring and toggles. Adjustable depth thanks to a rip-tab strap at the back of the hood. Shape memory visor provides good face protection.
Pockets
2 hand pockets with zips under flaps + 1 outer chest pocket with zip under a flap.
Jacket hem drawstring
Elastic draw-strings and toggles.
Wrist adjustment
Tightening tabs with velcro.
Main component
Double-coated fabric.
Technical linings
The fabric inside the sleeves is designed to manage perspiration and provide greater comfort when the jacket is worn over “bare arms” (on top of a T-shirt or another short-sleeve garment). Meshed fabric body lining to enhance the garment’s breathability.
Recommended additional product
Forclaz Rain overpants protect the lower half of your body and provide a complete and effective rain protection system for your mountain hikes. Care products: waterproofing spray or liquid in the machine To renew the fabric’s water repellent properties and optimize performance throughout the lifespan of your garment.
Waterproofing
NOVADRY® technology: this garment has been subjected to a shower test using 26 gallons of water/sqm/hour for 3 hours. This test reproduces the conditions of a violent storm in the mountains.
Waterproof component
To find out whether a fabric is breathable, we test its evaporative resistance or RET (based on the ISO 11092 standard). The lower the fabric’s resistance, the more water vapor generated by physical activity evaporates, and the higher the fabric’s breathability. For example: RET < 9 = extremely breathable fabric / 920 = little or no breathability.
Component breathability
In addition to breathable fabrics, Quechua develops technical solutions (zippers, ventilation, mesh, etc.) to improve the overall ventilation of its trekking jackets and overpants (Forclaz, Bionnassay and Helium lines).
These ventilation systems allow you to regulate the temperature inside the garment and also to facilitate the transfer of perspiration generated by the body during physical effort.
Component with membrane or coating
Coating: like a layer of “paint” applied on the underside of the fabric to make it waterproof while remaining breathable. It is often less costly than a membrane, and requires a lining for protection. The membrane: is like a very fine plastic film (polyurethane) making the component waterproof while remaining breathable. It has the edge, being more supple, lightweight, durable and often more breathable than coating.
Consists of 3, 2 or 2.5 layers
3 layers: the membrane is bonded to an inner and outer layer of the component. This construction helps the membrane last longer and boosts the component’s performance. 2 layers: the membrane is only bonded to the outer layer, the inner protective lining is free. This construction costs less but is generally more cumbersome. 2.5 layers: the membrane has inner protection with a kind of varnish coating rather than an actual layer to make it as lightweight as possible
Water repellency
A fabric is water repellent when it allows water slide over its surface without seeping in. This prevents the fabric from swelling, and keeps it lightweight, breathable and warm. The water repellent property is achieved by treating the fabric’s exterior. This treatment must be renewed throughout the garment’s lifetime (recommended after every three washes). All Quechua waterproof jackets have received water-repellent treatment.
Comparative note on the environmental impact of the products
The environmental impact of each product is calculated for the product’s entire life cycle, using different indicators. A general ABCDE mark is attributed to help you identify the best environmental performance by comparing products to each other (t-shirts, rucksacks, etc). Decathlon is a voluntary supporter of the environmentally-friendly labeling approach.
For more information visit: http://sustainability.decathlon.com/
Composition
Main fabric : 100.0% Polyester cationic
Lining : 100.0% Polyester cationic
Care Instructions
Wash at 86°F. Use liquid detergent; do not add fabric conditioner. Fasten zippers and hook and loop fasteners before washing. With each wash, renew the fabric’s water repellent properties using a suitable treatment. All our Decathlon stores offer a complete range of products specially designed to care for water-resistant and breathable fabrics. These products will help you optimize your garment’s performance throughout its lifespan.
Waterproof : 8,000 mm waterproof membrane. Fully taped seams.
Breathability : Hydrophilic membrane (RET=12): limits condensation inside the garment.
Ventilation : Underarm ventilation zippers: enhances moisture management.
Freedom of movement : Fitted at back for freedom of movement. Preformed elbows.
Lightweight : Weight: 22 oz in size L.
Pockets : 3 secure pockets.2 zipped hand pockets. 1 inner chest pocket.





















































Reviews
There are no reviews yet.